Transfer Ladle

TRANSFER LADLE

A ladle used to transfer a large amount of molten metal from one process to another. Typically a transfer ladle will be used to transfer molten metal from a primary melting furnace to either a holding furnace or an auto-pour unit.

Molten Aluminium Transfer Ladle is made up of Ladle shell, Ladle Liner, Ladle arm & Ladle cover.
To measure the temperature of refractory vessels of Ladle. The Ladle is preheated before pouring of the molten metal into it. Pre heating of the ladle is essential as it helps to withstand thermal shock of molten metal to ladle and prevents the refractory linings of it from getting damaged. Ladle should be preheated to an optimum Temperature. If the ladle is cool then the metal will explode from the sides of the vessel which hampers the safety and can be lethal. If the ladle is heated to a lower temperature refractory may crack. Very high temperature heating of the ladle results in the decrease of the insulating properties of the refractories.

Transfer Ladle

KR CAST 60

Application:
‣ Transfer Ladle.
Service Temp.:
‣ 1550°C Max.
Base Material:
‣ Calcined Clay, Sillimanite and high purity cement.
Special Features:
‣ Excellent for metal Lining.

KR CAST 70

Application:
‣ Retainer area of Transfer Ladle.
Service Temp.:
‣ 1550°C Max.
Base Material:
‣ Calcined Clay, Sillimanite and high purity cement.
Special Features:
‣ Excellent for metal Lining.

KR GUN CAST 80

Application:
‣ Knuckle area of Transfer Ladle.
Service Temp.:
‣ 1600°C Max.
Base Material:
‣ LF Bauxite,BTA, WTAand high purity cement.
Special Features:
‣ Excellent sticking at high Temp.

KR CAST 90

Application:
‣ Knuckle area of Transfer Ladle.
Service Temp.:
‣ 1650°C Max.
Base Material:
‣ LF Bauxite, WFA and high purity cement.
Special Features:
‣ Excellent strength & high-volume stability at high Temp.

KR GUN CAST 90

Application:
‣ Protect refractory lining of Transfer Ladle.
Service Temp.:
‣ 1600°C Max.
Base Material:
‣ LF Bauxite, BTA, WTA and high purity cement.
Special Features:
‣ Excellent sticking at high Temp.

Mixer&Torpedo Ladle

KR LC 70

Application:
‣ Mixer of mouth & leap area.
Service Temp.:
‣ 1500°C Max.
Base Material:
‣ LF Bauxite, Sillimanite and high purity cement.
Special Features:
‣ Very high strength & replaces back up lining.

KR LC 90

Application:
‣ Mixer of mouth & leap area.
Service Temp.:
‣ 1600°C Max.
Base Material:
‣ LF Bauxite, Sillimanite, WFA and high purity cement.
Special Features:
‣ Very high strength & volume stability.

KR GUN 85

Application:
‣ Mixer of mouth & leap area.
Service Temp.:
‣ 1600°C Max.
Base Material:
‣ LF Bauxite, BTA, WFA and high purity cement.
Special Features:
‣ Very low rebound loss & excellent resistance to Corrosion & Erosion to metal.

About Us

Khemka Refractories Pvt. Ltd. (KRPL) was established in the year 2003 at Dhenkanal, Cuttack. KRPL is equipped with modern machineries for production as well as research & development department.